Instructions for Adjusting Clock / Calendar Settings

NEC DK616, DK824 & NDK9000
DX10
Hybrex B1, Bx & Ax
NEC Xen Axis, Alpha & Master
Omni
Ericsson BP150
Ericsson BP250
Ericsson Tempo
Ericsson KS022 & KS096
Fujitsu Attendant Console
Fujitsu FDT 3 or 4
NEC ICS 120 / IVS 2000 / IPS 2000
NEC Topaz
NEC IPK2
NEC SV8100

OPERATION:

FNC

NEC PRO has feature button
β

9

(Dial pad)

β

#

(Dial pad)

ί . # ΰ : To move cursor

Dial Pad 0 – 9 : To enter Time, Date, Month, Year

RECALL key : To switch am/pm

To switch month and weekdays

HOLD key : To switch from Time Display to Date

Display

• Move the cursor to the data to be modified
• Enter the new data using the dial pad
• Press the RECALL key to switch am/pm
• Press the HOLD key to switch to set the Year, Month & Day

(Refer to example on next page)

Note: This is a station operation performed by the Attendant station

Program to change Time & Date

**** Must be carried out at STATION 1 with DISPLAY HANDSET

i Receiver UP

ii Press MEMO

iii Press HOLD (Memo light flashes)

iv Press * until screen is clear

v Press…Year, Month, Date, Day, Time

vi Press MEMO

vii Hang up

CODE:…………Year……Last 2 digits

Month……2 Digits (01-12)

Day……2 Digits (01-31)

Weekday……(0-6)……………………………………0……Mon 4……Fri

Hour……(00-23) 1……Tues 5……Sat Minute……(00-59) 2……Wed 6……Sun

3……Thurs

Note: * Steps back in case of error

Entering System Mode

To enter system mode from any station:

Password Protected Unprotected

1. Press [PRG], [7] 1. Press [PRG], [7]
2. Key in " PASSWORD " 2. Press [SAVE]/[DSS20]
3. Press [SAVE]/[DSS20]

IP = 01-06

ί Setting Data

Item Display Programming Data

Pointer Data Description
-------- -------- ---------------------------------------

01 01-12 Month……………………………

02 01-31 Day…………………………………

03 00-99 Year………………………………

04 00-23 Hour………………………………

05 00-59 Minute……………………………

06 1-7 Weekday (Monday = 1, Tuesday = 2)…

This program permits the setting of system Date & Time.

The Date & Time will be held during a power failure, there is no need to reset the Time after power is restored.

Set Time & Date:

• Press FEATURE button
• Dial 9 and # button

• Use dial buttons to enter Hours and Minutes
• Press RECALL button to change AM/PM

• Press HOLD button to change Date
• Press RECALL button to change Day of Week

• Press # button to move cursor to date
• Enter Date using dial buttons

• Press RECALL button to change Month
• Press # to move cursor to Year
• Dial last 2 digits of year
• Press FEATURE button

Changes to Date & Time

[FUNCTION]

#

[SAVE]

304

MM, DD, YY, W, HH, MM

Procedure to Change system time and date

KEY RESPONSE

PROG

FI Enter Password

ENTER Enter Command 6101 – date

6103 – time

6104 – 12/24hour

ENTER Set Year Month Date

Key in new date

1^st April 1997 = 970401

ENTER Day of Week 1 = Sunday

Key in corresponding number

1 = Sunday

2 = Monday

3 = Tuesday

4 = Wednesday

5 = Thursday

6 = Friday

7 = Saturday

ENTER Set Hour Minute Second

ENTER Shows current time with

flashing cursor

Key in correct time in 24 hour format

1:30pm = 153000

ENTER 12 H mode, Display

Y OR N (from letters above numeric keypad for Y press 9 key 3 times)

(from letters above numeric keypad for N press 6 key 2 times)

ENTER

C key to end programming setting

Procedure to change system time & date

KEY RESPONSE

*00# F1 Enter Password

33333 2^nd # Enter Command

6101 2^nd # Set Year Month Date

Key in new date

1^st April 1997 = 970401

2^nd # Day of Week 1 = Sunday

Key in corresponding number

1 = Sunday

2 = Monday

3 = Tuesday

4 = Wednesday

5 = Thursday

6 = Friday

7 = Saturday

2^nd # Set Hour Minute Second

2^nd # Shows current time with flashing cursor

Key in correct time in 24 hour format

1:30pm = 153000

2^nd # 12 H Mode, Display

Y or N (from letters above numeric keypad for Y press 9 key 3 times)

(from letters above numeric keypad for N press 6 key 2 times)

2^nd #

C key to end programming setting

Set Date and Time

[SPK] ΰ # * # * ΰ Password

00 ΰ Enter Command Ψ 0003 [HOLD]

Year:_ _ [HOLD] Month:_ _ [HOLD] ΰ

Day:_ _ [HOLD] *Week:_ _ [HOLD] ΰ

Hour:_ _ (24hr) [HOLD] Minute:_ _ [HOLD] ΰ

Second:_ _ [HOLD] Set:_ (1 Yes, 2 No)

Press DC to get out of the programming.

*Week: 0 - Sunday

1 - Monday

2 - Tuesday

3 - Wednesday

4 - Thursday

5 - Friday

6 - Saturday

Time & Date

Date Press HOLD 1

Enter: DD date

MM month

YY year

WW day of week (Monday = day 1)

Press HOLD

Press SPKR

Time Press HOLD 2

Enter: HH hour

MM minute

Press HOLD

Press SPKR

1. Place console in Position Busy
2. Press #803 (CMC will appear on display)
3. Key in 700
4. Press "SEL" key (P1-p4 will appear on display)
5. Press "DSP" (The year, month & day, week & time will appear)

   Month: 01 to 12

   Day: 01 to 31

   Week: 1 = Sunday

   2 = Monday

   3 = Tuesday

   4 = Wednesday

   5 = Thursday

   6 = Friday

   7 = Saturday

   Time: 00 to 23 Hour

   00 to 59 minute

   P1 = Year (4 digit)

   P2 = Month & Day (4 digit)

   P3 = Day of Week (1 digit)

   P4 = Hour & Minute (4 digit)

6. Press "DS4" (Cursor will now be under the time)
7. Change time by keying in new time (24hr)
8. Press "ADD CHG"
9. Press "RLS"
10. Press "TRM" then take off Position Busy

Time Change for Daylight Saving

1. Press #803 (CMC will appear on display)
2. Key in 700
3. Press "SEL" key (P1 & P4 will appear on display)
4. Press "DSP" (P1 Year and P4 Time will appear)

   Month: 01 to 12

   Day: 01 to 31

   Week: 1 = Sunday

   2 = Monday

   3 = Tuesday

   4 = Wednesday

   5 = Thursday

   6 = Friday

   7 = Saturday

   Time: 00 to 23 Hour

   00 to 59 Minute

5. Press "SEL" (3 times) until cursor is under time on P4
6. Change time by keying in new time (24 hr)
7. Press "ADD CHG"
8. Press "RLS"
9. Press "TRM"

Any display digital extension Changes for Daylight Saving

CNF TRF *

CNF TRF #

ST (REDIAL)

02

DE (RECALL)

2

DE (RECALL)

HR : MIN : SEC

EXE (CONF)

NEC Topaz

·         Press Speaker

·         Dial 828

·         Dial two digits for the hour

·         Dial two digits for the minutes (00-60)

·         Press Speaker to hang up

NEC IPK2

·         Press the Speaker key

·         Dial 728

·         Dial two digits for the hour (24 hour clock, 13 = 1:00 PM)

·         Dial 2 digits for the minutes (00-59)

·         Press Speaker to hang up

NEC SV8100

·         Press the Speaker key

·         Dial 728

·         Dial two digits for the hour (24 hour clock, 13 = 1:00 PM)

·         Dial 2 digits for the minutes (00-59)

·         Press Speaker to hang up